Best Way To Remove Broken Headphone Jack From Ipad

Then you turn your device so that the jack is facing the floor and the plug should slip out.

Best way to remove broken headphone jack from ipad. This will absorb any moisture that was left behind. A common method involves using a small dab of strong glue on a toothpick or on the remaining part of the headphone plug in an effort to reattach the broken part long enough to pull it. Do a little alcohol on the microfiber cloth to clean the headphone connector.

Pull off the broken jack using the toothpick or paperclip. Then you just push it in the jack so it slides around the broken piece of the plug. As quickly as you can shove the tip of the straw into the headphone port tightly so that it can form around the broken tip of the headphone jack.

This is another version of the second solution which is mentioned in this list. If the tiny post has a corresponding socket on the headphone jack where it separated just put the superglue inside the hole. Wait for it to cool for a few minutes.

4 Push it down as far as it will go to try and get the ink cartridge plastic around the broken jack. To clean a headphone jack start by removing the cotton from the end of a cotton swab until its the width of the swabs middle portion. 3 Slide the END of the ink cartridge down onto the metal jack.

5 Once you have it all the way down pull up slowly and the broken jack should slide out. Sometimes dirt and dust can get caked on and require a little more to remove it from the port requiring an implement. Method 1 1 Try using a Paper-mate or BIC pen.

2 Remove the inner piece with the ink in it ink cartridge. September 4 2008 Hi So I plugged in a 35mm jack plug into my iPhone 3G to test an audio system and on removing it the end broke off and is now stuck in the iPhone headphone socket. Insert the toothpick or paperclip into the socket until it touches the headphone jack.