Can You Use A Trim Router For Door Hinges

These notches or mortises should be just deep enough to allow the surface of the hinge to sit flush with the wood.

Can you use a trim router for door hinges. Using a straight edge router bit trim routers can trim edging pieces on the ends of plywood. By using this setup the hinge routing becomes so easy and standard. You can cut them by hand with a hammer and chisel or you can use a router.

Place your hinge flush against the door. Using the hammer and chisel carve the outline to dig out the score from the door. The door stand is an adjustable clamp that is ideal for securely holding a door in place for things such as planing the edge to trim it routing for hinge recesses or mortises for locks and for drilling.

For the novice to moderate user a router makes installing the hinges much easier and more accurate. You can clean up any saw marks with sandpaper a sanding block piece of wood ease the freshly cut edges. With the linked bit or a similar one youre stuck with routing to the depth of the cutters.

I have not worked with fiberglass doors previously. Many doors will not need a hinge router while other doors only have a slight marking for the hinges and others have nothing at all. With your door trimmed re-hang the door on your hinges.

I have had limited experience hanging doors in existing jambs most of my work has been pre-hung units but I am comfortable taking it on. Ask Question Asked 2 years 11 months ago. I only use a router on a door to mortise out for hinges.

This router bit has a perfect combination of ¼ inch and ½ inch shank. After reading the full article we hope you can now cut door hinges without a router easily. Put a book under the door to stabilize it and raise it up or enlist a friend to hold it for you.