How Do I Solder Two Wires Together

Bend the wires at 90 degrees half way between the end of the insulation and the end of the wire.

How do i solder two wires together. Bring both stripped ends together like shown in the image below. Let the solder melt and flow over the wires. Another approach that sometimes works is to first use a few turns of much finer wire to hold the two main wires together the whole blob then being soldered.

All of these approaches require that the wire material be solder-able with any enamel or oxide coating scrubbed off. Heat the joint not the solder. Just like you would do with two solid wires.

Place soldering iron under the wire. How to Solder Stranded Wire to Solid Wire. Here the solder does not act as a glue that holds the two wires together.

Tin the soldering gun ie melt a little solder on it. This will heat the wire to. The process is carried out using a small amount of metal alloy known as solder and a heated handheld tool called a soldering iron.

Ad Find China Manufacturers Of Solder Two Wires. When done properly you have a strong conductive connection that turns two separate wires into one. Strip off about 1 inch of the insulation from each end of the two wires using the wire strippers.

2 Heat the joint with a soldering iron or pencil from underneath. You need to wrap the wires one around the other. When the joint is hot enough just touch the solder to it and it will flow around it.