How Do You Make A Soldering Iron Tip

Tinning will also help to protect the tip and reduce wear.

How do you make a soldering iron tip. Generally beginners make a common mistake to choose a tiny soldering tip. Wipe the iron on a damp sponge to remove the excess. Heat it up to around 350C and wait.

Melt a small dot of solder over the tip in a thin coat. To use the Tip tinnercleaner heat the soldering iron. The flux in tip cleaner removes the oxidation and build up from the soldering iron tip and then the solder re-tins the tip ready for use.

Plug in the iron and turn it on. When the iron is not being used keep some solder on the tip. This prevents oxidation and corrosion.

When doing this slowly coil the wire until it achieves your desired diameter or area and having a measuring gadget would be ideal to confirm the requirements are as required. When using the iron keep a little solder on the tip when the iron is in the stand. There is a locking nut that holds the tip and tip-retaining sleeve in place locate and unscrew this nut.

As you do this make sure the designed shape fits the space of the soldering iron perfectly. Typically advised to be conducted after unpacking a brand new tool here are the steps on tinning a soldering iron. This step will coat the iron in a mixture of flux and solder.

This is a very simple process and like tinning a soldering iron tip it only takes a very short time to get done. If applied evenly this will keep the irons heat flow in check when it is next used in addition to preventing rust accumulation. If it doesnt you need to remove all solder and grind the.