How Do You Solder Small Wires

Touch the tip of the soldering iron to the copper wires.

How do you solder small wires. This will heat the wire to allow your solder to melt. Melt just enough solder onto the solder pad so that the capacitors contact lead holds firmly in place. Apply the solder to the top side of the wire opposite the soldering irons tip.

If you are working with a small heat source such as a candle or a lighter you need to use a small soldering iron like the tip of old scissors. You can fix it using a soldering iron as long as you follow the basic rules of soldering copper wire and make sure you. This will help conduct heat to the wire.

Step 4 - Place the Two Stripped Ends Together. Tin coat with solder the soldering tip first. To solder each connection.

Step 5 - Place the Connector Over the Ends of the Wires. Keep the iron in place and touch the solder to the wire until its fully coated. If you do need to use a littleadditional solder use the very thin kind about 2.

Use a pencilsoldering iron like the one in the same picture. This tool worked the best for me in the automotive application and make it a breeze get that tuff to reach wires repaired soldered and sealed properly. Pinch the wire tip between the solder and the iron tip to tin and flow the wire end.

Step 3 - Strip the Wires that are Being Connected. When choosing you need to be aware of the lead content flux content melting point temperature and size. Set the iron to the solders temperature range.