How To Change Piping Tips Without Coupler

Click to mark this step as completed.

How to change piping tips without coupler. Click To Mark Complete. The two parts of the coupler are the base and the ring. Open your piping bag and put it one hand and then using your other hand scoop the icing into the piping bag and then gently squeeze the icing down the piping bag until it just begins to come through the nozzle and then you can start piping.

This is how it would look like. Repeat this process for all of the colors and types of icing you have. Remove ring from coupler base.

Simply unscrew this ring remove this tip and add a different tip if other designs are desired while decorating. You can use icing tips with no couplers just push the tip inside the bag and cut the end off allowing just the end of the tip to stick out. And then push the coupler up so that you can cut your piping bag along the line marked earlier.

You would probably start and finish piping the flowers in one color first. The question becomes how to loosen the fitting from one pipe without tightening it onto the. Drop the coupler base narrow end first into the bag and push it down as far as you can.

Cut the bag at the line then push the tip down through the opening. If you dont plan on changing tips you do not need to use a coupler. Insert one end of the non-threaded galvanized pipe into the coupling.

Be careful not to cut too much of the bag away. These tips are high quality Korean made tips from Loyal. You then fill it up with the icing in the next color and continue piping.