How To Clean A Soldering Iron Bit

If all else fails Soldering Iron tips do not last forever.

How to clean a soldering iron bit. A dry cleaner can also be used. After securing and preheating the PCB and void in a vice or PCB holder you suck the solder off the board by squeezing and releasing the bulb from behind the hole. As you do this its best to let there be a little solder to ensure the bit is tinned properly.

Switch off iron and allow to cool Slide bit retaining spring forward until it is clear of the slot in the bit. Make the end red hot and use an old screwdriver. Make sure the sponge is damp not soaked with water.

Soldering iron tips are not made of nichrome like wood burning pens. To use the Tip tinnercleaner heat the soldering iron. Plug in the soldering iron turn it on and let it warm up for 23 minutes.

After trying both the sponge and flux to clean the tip of your soldering iron sal ammoniac would be the next step if the others didnt work. When you go to solder pull the iron out clean the tip add a tiny bit of solder to the tip then solder. How to clean and re tin your soldering iron Soldering tip cleaning how to clean solder tip easy - YouTube.

This step will coat the iron in a mixture of flux and solder. Clean the soldering iron. Just before turning it off wipe the tip and add a bit of solder to it.

Never use abrasives on the soldering iron tip. Therefore you will experience ash and wood material gathering on the tip very frequently. Its head is shaped like a chisel soldering iron bit.