How To Clean Headset Microphone Foam

Use a brush to clean any grit lipstick etc.

How to clean headset microphone foam. Please note that we are not virologists. First wipe on the cleaner in the area between the microphone element and the headband. Hand-washing the windscreen at lower temperatures using a degreasing detergent should be effective against the fat coating on the virus and is not likely to damage any printed logo.

Use UpDown Arrow keys to increase or decrease volume. At the end of the show I get the heavy tape residue off with goo gone. Small foam windscreens are delicate by nature and will degrade more easily over time.

Sanitizing involves popping the body apart on handheld microphones pulling off the microphone grill and windscreen applying some kind of sanitizing agent quite a bit stronger than just hard water and dishwashing liquid and then giving your microphone plenty of time to dry. Remove the foam from the warm water and squeeze out as much water as possible. The first step when cleaning a dynamic microphone is removing the grill from the body.

To control the flow of liquid cleaners clean headsets in sections. If necessary dish washing liquid may be applied. Simply twist and unscrew until it comes off.

Thoroughly rinse the foam and let it dry before putting it back to use. Foam windscreens To clean foam windscreens both large and small remove them from the mics and wash them gently with warm water and soap. The procedures outlined above are guidelines but might not.

Be mindful or pushing dirt or grime through the grille and into the chamber. Dampen a small cloth with rubbing alcohol or hand sanitizer and gently wipe down the exterior of the ear pads. Wiping them off with alchohol is supposed to be good but I dont have the patience to do that.