How To Clean Old Pipes

Run a pipe cleaner back and forth through the opening where the stem connects and down into the bowl.

How to clean old pipes. From here dip your pipe cleaners one at a time in the isopropyl alcohol and run them through the stem and shank until they come out clean. I read a recent posting saying well water pipes can be cleaned by adding 3 gallons or so of bleach and leaving it in overnight. Dip it in the rubbing alcohol and this time run it through the stem.

Shut off the water heater. Rinse the pipe with water. Steps to Descale Your Pipes.

To start this cleaning carefully remove the stem of the pipe from the bowl and lay the two pieces on a paper towel. Clean the stem. And since youre working with a pair of relatively strong cleaners here make sure you give your stem a good rinse with clean water when youre done.

Otherwise you will eventually have a clogged drain that does not empty properly. Put everything back and screw back the aerator. After a small amount of time the water supply in your home should be less constricted.

Let the water run out and flush your toilets. Remove the pipes from the container and scrub them with a wet cloth or sponge. Soaking the galvanized water pipes in vinegar is another solution to iron buildup.

That is puts a new pipe within the old pipe with no or minimal digging using a felt core and an adhesive. Use a cleaning solution if you want to but it is not necessary. Keep cleaning until all of the residue is removed.