How To Clean Solder Iron Tip

Dip the tip into the tinner making sure that the entire oxidized surface is in contact with the re-tinning product.

How to clean solder iron tip. When pre-cleaning is necessary for plated tips they should be cleaned with a mildly abrasive emery cloth and may require an acid flux to remove the oxides before tinning or re-tinning. The best tip tinner is your solder--tips should always be coated with a small amount of solder. Apply a bit of new solder so that all surfaces are coated.

If the iron tip is heavily oxidized then you should clean it with a different technique. Switch on the Soldering Station or the Iron and Make sure it is Hot Enough. Then dip the tip in the cleaner and do a slight twist action.

This will remove any oxides are in the tip. Once clean and shiny perform tinning and now your tool is ready to use. When solder melts clean the tip on the wool again so there is no solder.

This is done by first ensuring the tip is clean and free of surface oxides. Quickly insert hot soldering iron into coils of brass wool tip cleaner and twist it few times. This should lead to a clean shiny tip ready for use.

Try not to leave the iron sitting hot on the bench while not in use. Once the re-tinning product melts around the tip hold it for several seconds and then clean the tip using dry cleaning methods like brass wool or an automatic. How to Tin or Re-Tin Soldering Iron Tip.

Use stainless steel wool flux and thick clothe to clean the tip. To use the Tip tinnercleaner heat the soldering iron. This is because as the soldering iron expands and contracts quickly.