How To Clean Soldering Gun Tip

There are solutions specifically designed for this but a damp sponge works just as well.

How to clean soldering gun tip. Once the tip is clean and shiny press the soldering gun trigger to high and as soon as its hot apply a coating of solder to the tip. If you store the soldering iron for a long period of time re-tin the tip to help the iron dissipate excess heat when not in use. You may also use a desoldering iron to remove the solder.

Then immediately re-tin the tip with rosin core solder. It doesnt matter too much if its ugly as long as you can get a nice shiny bit right at the tip. It would be best if you wiped the tip after each solder.

Knack for effective removal of solder using the desoldering wire. Just rub the soldering iron tip on it after each solder. Blade tips are used for reworking a soldering section or for cleaning the pad of the soldering item.

After around 3 months the solder started to stick to the iron tips I like that The Iron is used daily for at least 3 hours I mainly use 3 tips out of the ten different ones. Turn off your solder iron and let it cool down for 15-20 minutes before cleaning the tip. Combinations of the HAKKO FT-710 and iron holders.

Then dip the tip in the cleaner and do a slight twist action. How to clean and re tin your soldering iron - YouTube. The idea is to rub the soldering iron tip every time you finish a solder joint.

First you will want to heat the iron up to operating temperature and wipe the tip on a damp soldering sponge to gently clean it. After a minute or two the iron should be hot enough to steam when touched to the sponge. With the iron tip cold use a polishing bar.