How To Get Better At Soldering

-Know how to utilize heat powerGnd planes -Learn to use hot air gun and solder paste.

How to get better at soldering. Before you can start soldering you need to prep your soldering iron by tinning the tip with solder. Using a wire cutter snip each lead just above the mound of solder. Get solder that is 60 tin and 40 lead.

Being an avid RC enthusiast there is so much soldering that used to have to be done in that hobby. If you solder something and find the join is not the best say its only soldered on one side use heat to bring the solder over to where its needed you might need to add a bit more solder. It is better to use a plastic sheet on the floor so that the foot will rest on the insulated sheet while soldering.

If you want to improve your soldering try to buy a decent quality solder if you can as it is much easier to work with than cheap solder. Some soaps have added moisturizers and could add a layer of oil to your hands. Put a nice little blob of solder on the tip of the iron.

Check out THE ULTIMATE FPV SHOPPING LIST. Hold on to the end of the lead to ensure you dont get speared in the eye by flying wire. Make a 3 degree of freedom hand to help with soldering gluing work and make your helping hands 100x more useful for soldering gluing small parts by leevonk to start.

If you would like to make a set of helping hands of your own there are already a number of good Instructables. So place the tip of the soldering gun underneath the wire and feed just a little bit of solder in between the tip and the wire. Oxidation grease and yes dirt.

Tinning will also help to protect the tip and reduce wear. Whether you are building your first quad scared of messing something up or just unsure of you. 4 steps Perfect solder joint -- How to improve smd soldering.