How To Make A Soldering Iron With Usb Charger

This project takes an existing tool the Hakko FX-901 cordless soldering iron and adds USB charging and a Lithium Ion battery inside a 3D-printed pack.

How to make a soldering iron with usb charger. How to make a soldering iron. USB Charger Trigger power supply. Adafruit shows you how to hack USB charging into the incredibly popular Hakko cordless soldering iron.

Connect the wires together red to red and black to black by soldering or wire twisting unreliable Cover the individual wire connections together with electrical tape having 2 separate pieces cover the black to black separately and red to red separately. No it is not. He is able to drive a regular Hakko iron at 20 V and 3 Amps providing it with 60 W of input power from a USB-C charger.

You will need flux for the desoldering. It is a battery protection circuit. If the USB power supply has the USB connector shell connected to mains earth and the USB soldering iron has its tip connected to the USB plug shield then the tip should be at mains earth as all.

2 two 4-40 x 38 oval- or pan-head machine screws steel brass or zinc-plate not nylon were using these as makeshift power terminals 4 four 4-40 nuts. The copper strips run horizontally on the back of the board in this image Turn the board around and solder the pins to the board. You are probably curious how long it took me - thinking about the whole project designing soldering - ehmm actually one minute - check out the video.

At this point plug the usb cable into a computer or usb wall outlet and ensure you have a good working connection. Click here to purchase our 7700 Quick Charge Iron. He gave his viewers a complete look at the inside of the iron.

A USB-powered soldering iron that draws its power from a Quick Charger 30 USB port. Home made soldering iron. T-Mass - Ignoring My Heart NCS Release Music provided by NoCopyrightSounds.