How To Make Soldering Iron Tip

Wipe clean before using.

How to make soldering iron tip. Whether its your childs electrical toys or circuit boards in a production facility that you solder the wise thing to do after unboxing a new soldering iron is to tin its tip to protect it from oxidation. A soldering iron is a necessary tool in the household for a person who loves to do everything with his own hands. Pliers will keep it at the proper place as well as tighten the windings.

Holding the iron in place touch the wire with the solder until it is completely coated. How to Tin or Re-Tin Soldering Iron Tip. So you get what you paid for.

Insert your prepared tip into the soldering iron. Probably the easiest way is to grind or taper one end of a long brass rod and then make rough threads similar to the ones the original non-brass tip has screw it into the soldering iron cut it off an inch or so and then sharpen the end that was just separated from the rod. Applying lots of solder gives it more mass and a longer cool time.

This step will coat the iron in a mixture of flux and solder. The main characteristic of soldering is the maximum temperature at the soldering tip. Avoid excessive wiping on a wet sponge as this can cause temperature fluctuations which expand and contract the metal and stress the tip.

If so you can do it with a normal soldering iron. Your soldering iron tip. Place the soldering iron tip onto the sensor and apply solder as if you were making a solder connection.

Use sponge soaked in water to wipe the tip clean regularly. Switch OFF the Soldering Station or the Iron. The power regulator on the triac.