How To Make Soldering Iron With Nail

Tack two crossed finish nails into a scrap piece of wood to make an ideal holder for your soldering pencil or iron Fig.

How to make soldering iron with nail. Also most enail coils run at 120 volts. Twist the wire ends of the two points to be soldered together into a J shape. Make it into the shape you need.

Choose two points which will be soldered together. The PID controller has a few setting that need to be tweaked. Join the two nails together permanently at the cross point using silver bearing solder.

On the same note there are a few China companies selling soldering stations that have been turned into enails. I am pretty sure that soldering iron is 24v max. - cut the sponge to nicely fit into the soap dish.

Grind off the flat head. Cut the wire and bend it with the needle-nose pliers most needle-nose pliers have a wire cutter built in. In such a jar it is very convenient to store various devices that are simply necessary during soldering.

Make sure it is tightly screwed on. Repeat this process for all 4 corners of the metal frame. Normal soldering irons dont have thermocouples like enail coils do.

This article will describe some simple to build soldering irons that can provide 15 - 30 W and are powered at low voltage 5 - 12 V depending on heater wire you use. Although soldering irons are quite cheap widely available and come in various shapes and sizes heres the DIY way. You can use this super hot soldering iron for soldering thick wires and all other heavy duty needs.