How To Make Your Own Soldering Tip

This should be adequate enough to make a solid connection.

How to make your own soldering tip. Clean and tin the tip of the iron with a dab of solder lay the center conductor on the pad of solder in the solder cup and press the tip into the wire and cup. Brass same length as copper tip with 2 times the diameter or 075 times the length of the copper tip and 17 times the diameter of the copper tip. The best way to keep a soldering iron tip in good shape is by using tip tinner - available at the usual places.

Begin by making sure the tip is attached to the iron and screwed tightly in place. This tutorial will show you how to make a general silver solder with a low melting point easy. Select the tip name you are going to insert from the tip list then insert the tip.

Before going to soldering process it is very important to follow some tips and techniques to get best output. How to make your own motorcycle cables. Find the long tab that extends out of the RCA end and has a hole in the center.

Let the solder cool completely for a few. Hold the trigger wait wait and wait some more for it to get to temperature make your joint let go of the trigger and now its cooled off. For it to work properly you need a notch in the lip of the solder sucker tip.

Youll have the soldering iron tip and the solder sucker tip on the hole at the same time. If everything checks out you should be ready for some soldering. Wait for few seconds and take back both your hands.

Science Fair Project Ideas Answers Tools. It should be smooth and shiny. Niche has a wide variety of ready made cables you can easily modify.