How To Re Tin Soldering Iron Tip

Wipe OFF the solder on the Cleaning Sponge or Copper Wool.

How to re tin soldering iron tip. Tin The Soldering Irons Tip. Wipe off molten solder on damp sponge. Use Plato AB-3 polishing bar.

If your soldering tip becomes detinned oxidized it can be restored in a number of ways. But if any of these things are neglected in the soldering process you may need to re-tinner your tip. Solder performs poorly on dirty oxidized or greasy surfaces.

Now the iron will start decomposing the Sal and giving off clouds of HCl and ammonia smoke try not to breathe it its probably not good for you. Melt some good quality of solder wire on the Tip. Pliers will keep it at the proper place as well as tighten the windings.

Get a sponge to clean the tinned tip and voila. Your soldering iron tip. This method utilizes the Ame.

After a minute or two the iron should be hot enough to steam when touched to the sponge. Your goal is to remove old solder from the tip. At this point you have made a little hole in the block and you want to feed in a little solder keep rubbing it around and the tip will be re-tinned.

Hold the solder to the tip while its heating up to make sure you tin the tip before it has a chance to turn black. These tips will make sure your soldering tip does not become oxidized and need to be re-tinned. This is done by first ensuring the tip is clean and free of surface oxides.