How To Solder 2 Solid Wires Together

Soldering is a great way to make a quick repair or to create a permanent connection on a wire or another type of electrical component.

How to solder 2 solid wires together. How to Solder Stranded Wire to Solid Wire Cut the two wires to be soldered together to the appropriate length as needed for your project. The process will form a good solid joint. There is one way to twist wires together for soldering- a horizontal twist that yields a continues length of wire.

When the joint is hot enough just touch the solder to it and it will flow around it. And - Solid-core wire requires more heat to solder a pencil soldering iron might not be enough a soldering gun of at least 100 watts may be better suited. Plug the soldering guniron into an electrical outlet and allow it to heat up for about three to five minutes.

Assumptions I see that you live in the US. On the solder station. This will heat the wire to allow your solder to melt.

A piece of coax braid is good for burnishing the wire. Wire splicing and soldering is a basic skill that any DIYer can masterbut it all starts with a solid connection between the two wires. Connect together stranded wire and solid wire as shown in the third picture.

Thats where the Lineman splice comes in. Or a bit of steel wool or fine-grit sandpaper will work in a pinch. Cut the two wires to be soldered together to the appropriate length as needed for your project.

The wires will melt and will get soldered together. Heat the joint not the solder. Strip off about 1 inch of the insulation from each end of the two wires using the wire strippers.