How To Solder 2 Stranded Wires Together

2 Heat the joint with a soldering iron or pencil from underneath.

How to solder 2 stranded wires together. Apply a small amount of solder flux. In the case of stranded wire always keep the individual strands together after stripping the insulation by firmly twisting them together or better still applying a little solder. For low voltage applications fan out the copper strands and then twist them together.

3 Heat the shrink tube to make it shrink down around the wire. Tin the soldering gun ie melt a little solder on it. Top free images vectors for How to solder two stranded wires together in png vector file black and white logo clipart cartoon and transparent.

Use a thin solid wire 28 AWG-30 AWG and wrap it around both wires. Connect together stranded wire and solid wire as shown in the third picture. This video starts by showing the simplest technique for twisting two wires together which commences by baring the ends and overlaying them at 90 to each other as shown below.

Youll get a straight wire that has a little sideways bump in it so get a larger shrink tube to isolate it youll need two times the diameter of one wire. The un-twisting of your pre-twist will put the twist on as in the instructable. U of W diganRFopt EE.

Tinning the tips of stranded wires holds the fine wires together and makes it easy to connect them to screw terminals or other connectors. A piece of coax braid is good for burnishing the wire. In the first case make sure the bare end of the wire is at least long enough to make a half tun around the screw and always wrap it round the screw in the same direction as you will be tightening it.

1 Strip the wires of about 12 in. Screenshot from YouTube video The wires are then twisted together after which they are folded back against the side of one of the pieces of wire as shown below. This process should melt the solder and coat both wires evenly.