How To Solder 2 Thick Wires Together

Slide heatshrink glue lined sleeving over the join on the soldered bit only then slide more glue lined heatshrink over the whole of the area an seal the whole lot.

How to solder 2 thick wires together. Third use a vise to gently hold the wire steady several inches away from the terminal. Fourth using an iron melt a little solder onto the outside of the terminal sleeve with the. Remove the soldering iron and wait a few seconds to let the soldered connection cool and harden.

Ryan likes to use these little roach clip things to hold one of the wires. 326 mm 9 114 inch 291 mm 10 102 inch 26 mm 12 081 inch 50 2 mm thick About as thick as a standard wire coat hanger 14 064 inch. 8 128 a little over 18 inch.

2 Heat the joint with a soldering iron or pencil from underneath. These tips work on any soldered wire connection. Use heat shrink to cover the connection.

Twist wires four or five times with fingers for thick wires you may use pliers instead of fingers Cut the excess wire. Take it from a sparky. The process of soldering is taking two or more wires and joining them together and then using heat to melt electrical solder connecting those two wires permanently.

There are three main ways to solder wires together. You should see the solder flow between the strands through the whole bundle. Now place the two tinned wires together and hold still while heating them with the soldering iron so that the tin on both of the wires melt together.

Twist and fold twisted helix and lineman splice. A bit thicker than 116 inch. Heat up the joint and melt the solder with the wire not the soldering iron.