How To Solder 2 Wires Together

This process should melt the solder and coat both wires evenly.

How to solder 2 wires together. Put a little solder on the tip of the iron to bridge the gap between the iron tip and the wires to be soldered. So the following technique may be. Use nothing but 60-40 rosin-core solder intended for electrical wiring.

Or else it will make the wire firm. Another technique of soldering two wires together is the lap splice. One can be melting attaching the solder to the pin header and cutting the unwanted part using the hot soldering iron.

Keep touching the solder to the wires until the wires are hot enough to melt the solder. Hold the two tinned wires on top of each other and touch the soldering iron to both wires. Tin the soldering gun ie melt a little solder on it.

Telegraph twist strip about 34 of an inch off of both wires place them together like an X and twist them togetherdont lay the wires side by side lay them so when your done twisting they look like a straight piece of wire this should leave you with a little less than 34 of an inch of bare wire showing twist them tight and only solder a 38 inch section or so in the middle of the. The best way to splice wires is to wrap them together tightly using multiple twists to. Twist and fold twisted helix and lineman splice.

The process also helps in the distribution of heat evenly throughout the wire. Use heat shrink to cover the connection. Let the solder melt and flow over the wires.

Ad Low-Price High-Quality electronic Connectors Ready to Ship. Be sure to strip enough insulation from the wire to allow for several twists between the two pieces of wire. How To Easily Solder Wires Together No Soldering Iron - YouTube.