How To Solder 3 Wires Together

There are three common techniques to solder wires together.

How to solder 3 wires together. Then practice soldering two wires together after youve tinned them. Solder is attracted to heat so as the solder melts it is pulled towards the heat through the wires connecting every strand together with solder. Step 3 - Strip the Wires that are Being Connected.

Practice before you start in on the bike - get some wire pieces and practice tinning them strip the wire twist the end of the wire to organize the wires and solder it - basically to itself. Soldering Multiple Wires for a Distribution Joint Step 1. Cover With Heat Shrink.

Bringing copper wires together through soldering may be necessary to fix electronics or used for a wide range of metal art projects. Its not too difficult. Youll get a straight wire that has a little sideways bump in it so get a larger shrink tube to isolate it youll need two times the diameter of one wire.

Step 5 - Place the Connector Over the Ends of the Wires. Connect together stranded wire and solid wire as shown in the third picture Use a thin solid wire 28 AWG-30 AWG and wrap it around both wires. 1 clean the wires so they shine 2 twist the wires tightly together and steady the connection with clamps and 3 heat one end of the connection with the tip of the soldering iron.

You should not be able to pull the bundle apart once the solder has cooled. Wrap the Entire Bundle With a Separate Strand. Keep the iron in place and continue to touch the wire with the solder until it is completely coated.

Let it cool without being disturbed. Step 2 - Choose the Right Size Wire Connector. To get started use wire strippers on the wire so you have bare wire exposed.