How To Solder Electrical Wiring

The best solution to cover soldered wires is heat shrink tubing and it must be installed BEFORE the soldering is done.

How to solder electrical wiring. The most reliable way of joining two wires together is by soldering. First you will have to strip off the insulator that covers the wires. If you want you can add soldering resin to the wire filaments.

It is as easy as 1-2-3. Step 4 - Place the Two Stripped Ends Together. Mudder also sell thicker wire up to 15 mm and thinner 03mm wire for delicate soldering applications eg.

1 clean the wires so they shine 2 twist the wires tightly together and steady the connection with clamps and 3 heat one end of the connection with the tip of the soldering iron. The broken wires can be repaired without replacing the entire harness or section. Meets The EU RoHS Directive 201165EU Claim.

Touch the tip of the soldering iron to the wires and keep it there. Once the solder has cooled simply slide the tubing over the joint and use a lighter or heat gun to shrink it. Its the act of using heat via a soldering iron and a fusible metal the solder to create the electrical connection.

Damaged wiring can be soldered to complete or repair an automotive electrical circuit. Step 2 - Choose the Right Size Wire Connector. Solder is often a combination of mixed alloys.

Meets The EU RoHS Directive 201165EU Claim. Hold the two tinned wires on top of each other and touch the soldering iron to both wires. AND USE NON-CORROSIVE FLUX.