How To Solder Small Wires Together
Make sure your soldering iron is fully heated and touch the tip to the end of one of the wires.
How to solder small wires together. If you do it right you get a big melted bead ON the iron but with the wires running through the middle of it. Tin the soldering gun ie melt a little solder on it. If the wire is stranded twist the strands together with your fingers.
Use rosin core solder. Touch the solder with an iron tip while joining it with the header. Heat the pads and melt a small amount of solder on to each pad and let it cool.
Apply Solder Flux to the Wire Joint. Make seven or eight turns and cut the excess of the wire. Using a Wire Stripper Strip the Wires to Desired Length.
Be careful to not overheat the wire and melt the insulation or allow the soldering guniron tip to touch the insulation. Usually no additional solder is necessary. How to Solder Wires Together Correctly Like a Pro.
Then place the wire on top of the cool solder and use the soldering iron to melt it all together. Apply a small amount of solder flux. Put just enough solder to fill the joint.
I just did exactly this the other day - these LED strips are neat. Lock and Firmly Twist the Stripped Wires Together. Soldering by Heating the Wires Directly.