How To Solder Two Solid Wires Together

Slide the heat shrink over the newly soldered connection so it is completely covered.

How to solder two solid wires together. Press the ends of the wire down with your fingers to pliers to form a solid mechanical connection. Remove the soldering iron and wait a few seconds to let the soldered connection cool and harden. First place the solder on the tip to allow for melting.

Your solder will be applied opposite from the iron on top of the wire. Make seven or eight turns and cut the excess of the wire. Place soldering iron under the wire.

Rather it helps in conducting electricity. You need to wrap the wires one around the other. Follow along with this short video to learn how to solder two wires togetherCar.

The wraps should be adjacent and close to each other. This process should melt the solder and coat both wires evenly. Plug the soldering guniron into an electrical outlet and allow it to heat up for about three to five minutes.

Thats where the Lineman splice comes in. If you want to join two wires with solder the first thing you should do is to tin the two wires. This process of tinning the base metals separately is.

You can do this tinning part in two ways. Use a thin solid wire 28 AWG-30 AWG and wrap it around both wires. You simply touch the freshly tinned tip of your soldering iron onto the bare wires for a couple of seconds and then apply the solder at which point it will smoke and flow over the wires almost immediately and you can withdraw the solder and then the iron and you should be left with a bright silver joint like the.