How To Solder Two Wires Together

Put a little solder on the tip of the iron to bridge the gap between the iron tip and the wires to be soldered.

How to solder two wires together. The solder will flow to where the heat is wick or sweat soldering copper pipe is called sweating joints. The main problem is not the solder joints themselvesbut rather that you have to untwist the wires in the area of the joint. Your solder will be applied opposite from the iron on top of the wire.

Put just enough solder to fill the joint. Youll also need some PVC shrink tube. On a basic level there are essentially two types of solder wire lead-free solder contains mix of copper and tin and leaded solder contains tin and lead.

This process should melt the solder and coat both wires evenly. The process for soldering 3 wires together is the same as splicing 2 4 or even 10 of them. To get started use wire strippers on the wire so you have bare wire exposed.

The simple welding technique binds metals together to form electrically conductive joints in a way where you can easily detach them later if necessary. How to solder wires together. To gather stray strands into the intermingled bundle.

Cut the two wires in order to make sure that the copper core of the wire is not corroded or contaminated inside see image below. Touch the tip of the soldering iron to the copper wires. Tinning is the process of melting the solder around the wires.

Keep touching the solder to the wires until the wires are hot enough to melt the solder. This technique is good for both stranded wires and solid wires. How to Solder Wires Together Best tips and tricks - YouTube.