How To Solder Wire Tips

Safety Tips for Soldering Ways.

How to solder wire tips. With the soldering iron in one hand and solder in the other place the soldering iron tip at the end of the twisted core. The twist the strands together to form a single neat core. Touch the tip of the solder to the tip of the soldering iron to create a small pool of liquid solder on the irons tip.

Ad Safe Trading Solder Wire Extruding Machine on Leading B2B Platform. Then touch the tip of the soldering iron to the bottom side of the wire so the solder pool is in contact with the wire. Remove the soldering iron and wait a few seconds to let the soldered connection cool and harden.

Keep soldering iron cleaning accessories such as wire pads and damp solder sponges close at hand ensuring that the irons tip is kept as free from material build-up as possible during use Never touch the soldering iron anywhere except the insulated handle sometimes referred to as the wand. This solder is going to melt against the tip and wire so its going to speed up. Make sure your soldering iron is completely hot before touching the tip to one of the wires.

You can also apply some solder. There is one way to twist wires together for soldering- a horizontal twist that yields a continues length of wire. For un-strippable wire you will want to crank the temp up to 750F and of course use a high temp solder.

To tin a wire apply the tip of your iron to the wire for a second or two then apply the solder to the wire. Remove the insulation from both ends of the wires youll be soldering together. So all you do is get some rosin on the wire tip and gently push the wire into the hole where the surface tension of the solder and the temp melt the enamelcoating and push it off tinning the wire.

Repeat this process on the other wire. Then the obvious supplies like soldering iron iron tips solder. Apply the solder to the top side of the wire opposite the soldering irons tip.