How To Solder Wires At Home

Then twist the filaments of each wire tightly to make them orderly.

How to solder wires at home. A cold solder joint happens when the hot solder hits a cold wire hardening it. The wires will begin to heat up. Hold the two tinned wires on top of each other and touch the soldering iron to both wires.

Begin by removing the insulation from the ends of both wires you are soldering together. If possible try to open earphone casing using blade. Note that the wire will get hot so you should consider holding it with some tweezers or similar.

And then remove wire casing and solder individual wires in right places. The advantage of solder is that it may be easily. Place the tip of the iron on the wire and let it heat for a few seconds.

To make your own solder you would need a foundry to melt the copper and tin and specialized extruder to create the wire evenly and WITH a rosin core and a way to coat the solder evenly in flux a dip bucket just outside the extruder would probably do. Making a soldering litz wire is of as following. It is as easy as 1-2-3.

Keep the iron in place and touch the solder to the wire until its fully coated. If you want you can add soldering resin to the wire filaments. Soldering Two Wires.

The best way to splice wires is to wrap them together tightly using multiple twists to ensure maximum contact between the two wire sections. Videos you watch may be added to the TVs watch history. Please dip the litz wire without removing enamel coating into the soldering jarpot.