How To Solder Wires Together With A Soldering Iron

One is to touch the solder with iron and transfer this attached filler into the targeted tips directly from iron.

How to solder wires together with a soldering iron. Solder by Heating the Wires Directly. This process should melt the solder and coat both wires evenly. Cover the connection with heat shrink.

In this you have to use a soldering iron and melt the solder into the filaments. Keeping the tip of the soldering iron pressed in place move the solder wire along the wires coating it as you go. If you cannot afford the nichrome wire buy just a gas torch for less than 10 from the local hardware store.

Remove the soldering iron and allow the soldered connection to cool and harden for a few seconds. Preload the Soldering Iron Tip with Solder Wire. You interweave the threads of the wires together before soldering the joint solid.

Apply Solder Flux to the Wire Joint. Tools need will be a soldering iron heat machine rosin flux solder 3M silicone dielectric grease wire s. The best method showing how to easily solder wires together with no soldering iron.

If you are soldering wires strip the insulation off the ends of the wires to be soldered together. Soldering by Heating the Wires Directly. Solder the Wire Joint.

Lock and Firmly Twist the Stripped Wires Together. Add the proper amount of solder into the connection. Remove the soldering iron and wait a few seconds for the solder joint to cool and harden.