How To Solder Wires Together Without Solder

Later on melting the other side of the solder to connect it with the wire.

How to solder wires together without solder. Slide the existing wire into the open side of the connector then put the end of the wire you wish to connect to it into the other side. Repeat this process on the other wire. Finally remove the extra Solder with a sponge.

Touch the solder with an iron tip while joining it with the header. Replace the iron tip before turning on the iron while the iron is still cool. One can be melting attaching the solder to the pin header and cutting the unwanted part using the hot soldering iron.

Smith explains that soldering two wires together doesnt even require a soldering tool but if you need to do some more intricate work steel is the best choice for an impromptu tool. You might be welding or brazing or even gluing. If the wire is stranded twist the strands together with your fingers.

If you are only without a soldering iron you might use various methods of raising the temperature of the workpiece s and the solder. It doesnt require a soldering iron and is quite easy to do. If you dont have a soldering pot you can make a simple tool to use tools nearby as the above movie clip.

If you are soldering wires strip the insulation off the ends of the wires to be soldered together. How To Easily Solder Wires Together No Soldering Iron - YouTube. If you plan to join the wires by twisting remove the insulation layer a little more a little over an inch than youd do when you using a crimp connector.

And then cool it for some time. However if soldering isnt an option you can use a conductive adhesive or wire glue. Avoid applying your solder directly on the heated area since there will be a build-up of soot and other chemical residues which will make it relatively challenging for the solder to stick properly.