How To Solder Wiring

Clean the tip on the sponge giving it a brief wipe.

How to solder wiring. Hold the two tinned wires on top of each other and touch the soldering iron to both wires. Repeat this process on the other wire. Then twist the filaments of each wire tightly to make them orderly.

How to Solder Wires Together Best tips and tricks - YouTube. The oxide forms a covering layer over the metal and prevents the solder from sticking to it. Using assisting hands or another form of clamp device is recommended for this process.

Place the soldering iron underneath the wires and apply the solder from the top. Then add some solder until the wire is soaked with solder. At first take the solder near the male header and slightly touch the solder with the soldering iron.

Take your hot soldering iron and melt a small amount of solder on each wire even the unexposed ones. The flux prevents oxidation occurring when the oxygen in the air reacts with the hot metal. Unless a very specific flux is required that is not available as a wire solder core flux core wire solder is generally recommended.

Thanks for watching The Flat Rate Mechanic. Once the connection evenly turns the correct silver color of solder remove the soldering iron and allow the joint to cool. When the solder reaches the soldering gun the connection is made.

The process is carried out using a small amount of metal alloy known as solder and a heated handheld tool called a soldering iron. When you solder items together youll typically be using the hot metal tip of the iron to melt a small amount of solder alloy around and. First you will have to strip off the insulator that covers the wires.