How To Tin Soldering Iron Tips
Dont let it run dry.
How to tin soldering iron tips. It will generally just wipe away. A solder pot may also be used to tin or re-tin your soldering iron tip. Insert your prepared tip into the soldering iron.
Ive successfully retinned several very bad irons. Same goes for the old soldering iron but in a different way. Get a sponge to clean the tinned tip and voila.
Never apply flux directly to a soldering iron tip. You will want to tin your tips when you first purchase them before use when the iron is sitting idle in the holder during use and when you finish soldering before you pack your tips for storage. Wipe OFF the solder on the Cleaning Sponge or Copper Wool.
With the iron tip cold use a polishing bar. Pliers will keep it at the proper place as well as tighten the windings. First you will want to heat the iron up to operating temperature and wipe the tip on a damp soldering sponge to gently clean it.
A polyurethane foam bar with embedded abrasives which is used to polish the working end of the tip to remove surface oxides. Do not wait for it to get hot before touching the solder to the tip. How to Tin or Re-Tin Soldering Iron Tip.
Clear a work area then grab your soldering iron a solder sponge and water. Soak the sponge using the water squeeze it out a little then use it to clean the tip of the soldering iron. How to Clean Soldering Iron Tip.