How To Use Solder Sponge

When you have a lot of flux or contaminates a wet sponge cleans it quickly.

How to use solder sponge. Turn of the iron if it remains inactive for 3-5 minutes. Hold the soldering iron in one hand and solder in the other. The Basic Soldering Guide Photo Gallery S oldering is a delicate manual skill which only comes with practice.

It prolongs the life of the tip and keeps it well-maintained after each use. Distilled water is used when making High Purity Water. Distilled water is used primarily as a solvent for reagent preparation as a calibration standard or analytical blank for cleaning testing equipment and rinsing an analyte.

It should be damp not dripping wet. Then wet the spong with Fantastictm and water and wring out. The whole point of keeping the soldering iron tip clean is to protect it against wear which can lead to tip failure.

Wipe the tip of the soldering iron on a damp wet sponge to clean it. The brass sponge is ok but it seems you do have to train it so it doesnt splatter the solder but stabbing motions into it seem to not splatter the solder compared to just laying it on top of it and rolling the iron like you do on a wet sponge. Now lets look at how to use soldering irons properly and how to put things right when a joint goes wrong.

Touch the solder to the tip of the iron and make sure the solder flows evenly around the tip. Press the release button to suck up the liquid solder. The sponge should not be dry as it will get charred.

Apply a small amount of solder to prevent further oxidation. Touching the heated iron can cause second- or third-degree burns. To use press the plunger down at the end of the solder sucker.