Proper Way To Solder Wires

Place the heat shrink over the wire and keep it away from the area to be soldered.

Proper way to solder wires. Its vital to use a soldering iron that brings the wire up to temperature quickly. Twist the wires together. Some say its better to joint the two wires using a Y-splice while some only swear by the good ol rat tail splice.

Apply a little solder to the tip before applying heat to the twisted wires. Once the connection evenly turns the correct silver color of solder remove the soldering iron and allow the joint to cool. Ive done 100 headphones with this technique and before i struggled for another long period like most of you.

The heat shrink should be cut so that it is about a 12 longer than the area to be soldered. Ad tvcmall Smartphone Accessories of Various Brands to Global Customers at Affordable Prices. Tools need will be a soldering iron heat machine rosin flux solder 3M silicone dielectric grease wire s.

Results in perfect solders and joints 99 of the time. And with that now you know how to solder wires so go practice on some wires. After making the repair let it cool slightly.

Repeat this process on. Hold it on the wire for 3-4 seconds. I will show you how to solder wires together the right way to seal the solder joint with heat shrink is a must and you also need to make sure you do not have a cold solder joint.

Wholesales and Retails Quality Assured Smartphone Accessories of Various Brands. If the wire is stranded twist the strands together with your fingers. Begin by removing the insulation from the ends of both wires you are soldering together.