Proper Way To Solder Wiring

Heat the copper and apply solder to the side opposite the heating implement.

Proper way to solder wiring. The wires will begin to heat up. Melting on the side opposite the heat guarantees that the solder will really adhere to the copper rather than just coat the outside. Use solder with a flux core.

Instant industry overview Market sizing forecast key players trends. If your re-wiring your car or truck then this is a MUST Video For YOU. But even in the soldering community theres still room to argue.

Applying the solder to the iron tip may be tempting because its fast but it only leads to a cold solder joint. Always add your heat to the bottom of the wire and add your solder at the top of the wire so the solder melts into the wire. After making the repair let it cool slightly.

Apply a little solder to the tip before applying heat to the twisted wires. Ad Quality Solder Wire Drawing Machine. Place the heat shrink over the wire and keep it away from the area to be soldered.

Learn How to Solder Correctly. The reason the iron is placed on the backside and the solder wire to the front side is that solder. Whether its a resistor leg sticking through an eyelet or a hole in a printed circuit board or capacitor leadout wires wrapped around a turret or tag the iron should be used to heat the area where the joint is being made.

And with that now you know how to solder wires so go practice on some wires. This process should melt the solder and coat both wires evenly. Use heat shrink to cover the connection.