How To Clean Pyrography Tips

Rub the tips with the superfine sandpaper or emery cloth after the unit has cooled.

How to clean pyrography tips. Or use some ultra fine emery cloth much like you would expect to see used in a machine shop type setting to polish a piece. The Choices for Cleaning Your Tips Sandpaper. The tip went something like this.

579 exclVat From. Rub the white compound on to the rough side of the leather. If the pen is less than a year old tell us so and we will replace the tip at no charge.

You must clean your pyrography artwork with denatured alcohol before you seal it with a brush on finish. Rougher grades of sandpaper are not recommended. As you use your pen you can use sandpaper 320 grit to brush the buildup or residue off the tip.

You dont need to push down to hard just keep rubbing it in small circles. Its best if you can secure the razor blade or knife to something sturdy like a 2x4 piece of wood. 695 incVat Product Code.

It is really that simple. First turn off the power to your machine or pen and allow it to cool down. Then rub your pen or tip over the top of the compound to remove the carbon.

If you want to switch tips in the middle of your pyrography work always keep a bowl of cold water ready. You can also use a gentle scrape with the side of a straight edged razor which you can do while the pen is still hot. Then you can scrape the carbon off easily without having to stabilize both the blade and your tip.