How To Prepare A New Soldering Iron Tip

Clear a work area then grab your soldering iron a solder sponge and water.

How to prepare a new soldering iron tip. The flux in tip cleaner removes the oxidation and build up from the soldering iron tip and then the solder re-tins the tip ready for use. As the soldering iron heats and cools it expands and contract. Ultimate Soldering Starter Setup httpsamznto2LJHBIxHow to properly Tin a New or Re Tin an Old Soldering Iron Tiptinning soldering iron how to hel.

This process will help improve the heat transfer from the iron to the item youre soldering. Keep in mind you should lower the temperature down to about 500F for this process. After a minute or two the iron should be hot enough to steam when touched to the sponge.

Select a soldering iron tip to match the width of the pad. It is not uncommon for a brand new tip to be oxidized out of the box. Fit your new soldering tip onto the tip-retaining sleeve and slide it back onto the heating element.

Operate at the lowest possible temperature 800F 427C or lower. There are mainly 2 Components inside soldering iron. Well when the iron soldering warms up the iron plating which is the working surface would start oxidizing due to the temperature.

When the iron is fresh it is solder coated probably by first coating the tip with high temperature silver solder. Make sure they are really tight as that is where the connection happens. However iron tends to oxidize quickly.

One is a Heating Element and another is a Temperature adjustment control. Tinning will also help to protect the tip and reduce wear. If not wait a bit more or add more water to the sponge if its too dry.