How To Properly Tin A Soldering Iron Tip

This step will coat the iron in a mixture of flux and solder.

How to properly tin a soldering iron tip. Turn the solder pot on and allow it to achieve the desired temperature. Do not touch it with bare hands. Thoroughly clean the tip with fine steel wool or abrasive pad.

A properly tinned soldering iron is a tool when the working part is covered with a thin layer of solder. Instead set the iron to a very low temperature 500F 260C. Then apply a small amount of solder to the tip.

Use Plato AB-3 polishing bar. Then immediately re-tin the tip with rosin core solder. Iron tip requires proper maintenance in order to increase its lifetime and keep it properly functioning as long as possible.

Ultimate Soldering Starter Setup httpsamznto2LJHBIxHow to properly Tin a New or Re Tin an Old Soldering Iron Tiptinning soldering iron how to hel. Avoid applying too much abrasive solder wicks or dry sponges to remove solder from the iron tip. Plug in the iron and switch it on.

Clear a work area then grab your soldering iron a solder sponge and water. If the iron is old and in bad shape file or sand the tip back into a proper shape. Apply flux while the iron is still relatively cool and turn it on.

Same goes for the old soldering iron but in a. This should lead to a clean shiny tip ready for use for more info see this video. Typically advised to be conducted after unpacking a brand new tool here are the steps on tinning a soldering iron.