How To Solder Car Stereo Wires
As a general rule to solder wire with the stereo you must first remove the insulation from the wires ensuring they are clean.
How to solder car stereo wires. There are different ways of doing this and soldering is one of the most common. If the solder does not flow through more heat will be required. Crimping connectors and soldering adds resistance and more spots for corrosion to happen.
How To Test Car Speaker Wire With Multimeter. Apply a little solder to the tip before applying heat to the twisted wires. Solder the output wires to the desired input RCA.
Hold up both ends to form an X shape with the wire facing opposite directions. The 245 os a no clean solder that leaves very little mess behind. Now you have soldered your.
Strip the two insulated wires and twist the shielding into a third wire. I use Kester 44 or Kester 245. This wire will connect to the red wire on the stereo harness.
Soldering wont give out due to vibrations and bumps and heat-shrink will give you that professional touch. Shape the wire ends into a curved hook style. Apply heat from underneath until the solder has flown through the joint.
Solder the power wires to the voltage regulator. Make sure you are soldering correctly ground left and right. If playback doesnt begin shortly try.