How To Solder Fine Electrical Wires

If you have a solder pot then soldering through enamel wire can be.

How to solder fine electrical wires. The advantage of solder is that. If that is enammelled wire as it appears then as others have said the best method of stripping is to heat the ends with a flame to destroy the insulation and scrape off the residue. When soldering it is always a good idea to disconnect the wires from the electronics whenever possible as the heat can easily transfer to the electrical components.

The solder should flow freely into the wire and coat it. Dodgy wiring inadequate fusing and exposed connectors could lead to a fire. Making a soldering litz wire is of as following.

Then twist the filaments of each wire tightly to make them orderly. Do not put the solder on the iron tip as the tip will be hotter than the wire and the solder may not flow into the wire. Once the connection evenly turns the correct silver color of solder remove the soldering iron and allow the joint to cool.

If you want you can add soldering resin to the wire filaments. If the wire is stranded twist the strands together with your fingers. You need to apply the heat to the metal part on the plug because that takes the longest to heat and melt the solder.

The solder jar is made up by approx. The solder should be fed into the cool side away from the heat which allows it to be drawn in smoothly by the heat transfer through the wires. This process should melt the solder and coat both wires evenly.

A clean surface is required for good soldering. How to Solder Wires Together Best tips and tricks - YouTube. First you will have to strip off the insulator that covers the wires.