How To Solder Two Stranded Wires Together

Tinning is a process of using a soldering iron to melt solder around a stranded electrical wire.

How to solder two stranded wires together. Insert a piece of heat shrink tube on one of the wire. Tin the soldering gun ie melt a little solder on it. Make sure your soldering iron is fully heated and touch the tip to the end of one of the wires.

Heat the copper and apply solder to the side opposite the heating implement. Tinning the tips of stranded wires holds the fine wires together and makes it easy to connect them to screw terminals or other connectors. A major reason is during a fire or just during massive overheating the solder melts and the joint comes apart and the ends fly around.

To tin a wire apply the tip of your iron to the wire for a second or two then apply the solder to the wire. 3 Heat the shrink tube to make it shrink down around the wire. Strip off about 1 inch of the insulation from each end of the two wires using the wire strippers.

Let the solder melt and flow over the wires. When the solder touches the. The instruction is tailored for both first time solderers and intermediately skilled individuals looking to improve their technique.

4 Use more shrink tube to bundle multiple connections. 4 Use more shrink tube to bundle multiple connections. This video starts by showing the simplest technique for twisting two wires together which commences by baring the ends and overlaying them at 90 to each other as shown below.

By Mike Allen The most secure and durable way to splice two wires together is to solder them. 3 Heat the shrink tube to make it shrink down around the wire. 2 Heat the joint with a soldering iron or pencil from underneath.