How To Use Piping Tips Without Coupler

Next step is to fit the piping tip.

How to use piping tips without coupler. Twist on the small part of the coupler to secure. But since you are using plastic bags like everyone said just cut a smaller opening and make sure you squeeze the tip in and nothing will shoot out the sides. If the nozzle does not fit properly just remove the nozzle and cut a piece off again and then put the nozzle back in.

Drop the coupler base narrow end first into the bag and push it down as far as you can. If you have only one pastry tip and no coupler improvise using the tools you have. And then push the coupler up so that you can cut your piping bag along the line marked earlier.

Twist on the small part of the coupler to secure. Place the decorating tip over the part of the coupler which is showing through the hole. If using a mechanical fitting the chamfering will keep the gasket or Oring from being damaged.

Once cut push the coupler back to the tip of the piping bag. I got this tip watching one cooking show at one Indonesia channel and find it useful so now I am sharing it with you. The first and most obvious way to connect PVC pipe and fittings without using glue is to simply push the parts together.

Though its best to use one if you want to do intricate piping. Step 12 Switch piping tips by removing the coupler ring then remove the piping tip and replace with a different tip. On that note if you like the frosting mixture in your bag but want to change tips and you dont have a large coupler heres what you can do.

Pipe all the way around in a circular motion and finish the rosette at the highest point or at 12 oclock if using a clock as a reference point. There are several ways of connecting PVC pipe without glue so we will go over those here. Use the side of your hand or the side of the glass to scrape the frosting off the spatula.